Phos guard

[Flowin]

I put phosguard in my return section is that a good spot for it?

 

[phishfriend]

should be fine. Works better with water flow thru it

 

[Flowin]

I give it a shake every couple hours so i hope that works alright.

 

[Phranque]

I give it a shake every couple hours so i hope that works alright.

That's not going to do a whole lot..... it pretty much needs a constant flow through it, not over it. If you don't have place in your sump to do that, a small reactor off to the side of the sump would be better... they have a very small footprint, and are relatively cheap.

 

[Flowin]

Alright thank you

 

[Flowin]

If i put it in a hob filter in my refugium would that work?

 

[Flowin]

I ended up mixing it with carbon in two filter bags right before my return pump.

 

[SaltwaterNuB]

Would it be ok in filter sock- sump

 

[Sniperhank]

You could trickle it through the filter sock probably, or stick it in between chambers like seen. THese will work, but not as effectively as using things in a reactor. Prior to getting my reactors, I used put media into a filter sock on the sump and liked everything but cleaning the socks.

 

[SaltwaterNuB]

A reactor is a filter pad?

 

[Sniperhank]

No, it's a canister where you put media into it that can be fed by a pump or from the overflow.