Digger's 125gal FOWLR build

The friendliest place on the web for anyone with an interest in aquariums or fish keeping!
If you have answers, please help by responding to the unanswered posts.
Way way overdue update.

Not much time to work on the tank over the last several months.

Had to redesign the overflow as I got good flow but way too much nose.
Widen the intake of the overflow to 6" and am getting >900gph flow.

I got a ton of micro-bubbles in the DT. No bubbles coming through the traps and only a very few where the water flows over the last divider to the return section of the sump.
Guess the pump is chopping these few up into hundreds of micro-bubbles on the way back to the DT. Installed a temporary fix and tested...

NO MICRO-BUBBLES and absolutely NO NOISE!! (y)

No to get water parameters right and start cycling. WOOHOO!!!
 
FINALLY! Build is complete.

Here are some pics of the finished 125 gallon tank:

Tank completely setup...



Overflow...



20L Sump...



20Tall Refugium w/ DSB...



Return...




Now I'll start a thread in the show your tank section when I start stocking.
 
Back
Top Bottom