2" U-bend?

[thincat]

try here:Clear PVC Pipe and Fittings - Alsco Industrial Products

[gzeiger]

How do you plan to get the air out of it for initial filling?

[thincat]

You can use an airtube to siphon the air out or you could use an Aqualifter pump and set it up that way. Either put a small elbow at the top or stick the airtube into the U tube.

[jsoong]

Clear PVC Pipe and Fittings - Alsco Industrial Products

This is an online source for clear PVC pipes & fittings. You should be able to make your U-tubes form this. It will cost you!!

You might want to phone local plastic supplies places. We have a local plastic fabrication place that will also sell retail.

[Mystery]

I just use an airtube. I did have an Aquabridge but it is badly designed and too large. Currently I am using a 1 1/4 inch siphon u-bend which is just the right shape but slightly too small for the fish to use. What I really need is a U-bend like a sipon u bend, but 2-3 inches in diameter.

[thincat]

jsoong's local shop is your best bet.

[InfernoST]

Originally Posted by CaptainAhab

Kewl.. sounds like you could use reg schd-40 white PVC for the connector between the 45's/90's then it would be mostly clear .. Until the algae/bacteria/gunk slime coat the pipe. Ever look at inside of a canister hose? Yuck

It' GROSS

[partypalooza5]

Originally Posted by InfernoST

It' GROSS

Eh, I say it looks delicious!

[thincat]

I hear with a ton of salt it's not to bad!

[InfernoST]

I'll let you know tomorrow.