Garf stand problem-will it fit? - Aquarium Advice

hannibal_lector · 10-06-2005, 08:58 PM

I did the garf page and want to upgrade my stand from 28"tall to maybe 38" or even more...(for 55gal)

The problem is that I also want it to be wider because it dawned on me to just build a stand that looks nicer AND can fit a sump in it. The stand I have now is less than 12" deep inside so I cant fit any standard aquarium as a sump. Since I'd like a better taller stand anyway this works better than both building a sump and a cabinet for it...

ANYWAY ON TO THE PROBLEM! which is that I set the depth as 16" but that would I'm guessing be structurally bad because the weight would be off the sides and on just the center posts...so I need a way to reinforce yet keep it wide?!

mp3z24 · 10-07-2005, 01:25 PM

so, are you building a stand for a 55 gallon tank? im confused. also, is this a glass or acrylic tank?

anyway, if you are building one for a 55 then listen up. i made a 2x4 frame to support the entire base of the tank, and a 2x4 frame to sit on the floor. my tank is glass, but this stand should work for an acrylic also (as long as you make a flat top for the complete tank to sit on). at the corners, i used 2 2x4's standing on end, and i screwed them together to form an "L". these were the legs that went between the top 2x4 frame and the bottom 2x4 frame. i used some heavy duty corner bracket (NOT those dinky little L brackets) to secure the legs to the 2x4 frames. I also added a vertical 2x4 in the front to break up the front face and provide an opening for my doors. if you use 2x4s you shouldnt need a brace in the front or back... but like i said, i added one for aesthetics.

so, if you build the basic box frame for the stand, then you can use whatever you want to increase the outside dimensions. just remember that the parts that hold up the tank need to be sturdy. the center vertical braces are not needed for a 55 gallon tank stand made from 2x4's.

i hope this makes sense... if you have questions post a sketch of what you want to build.

edit: i used Simpson Strong Tie part RTA2Z for my corner bracing... http://www.strongtie.com/products/connectors/RTC.html

~mike

greenmaji · 10-08-2005, 01:45 AM

Im thinking that Ive seen stands build that are wider then the tank in order to make room for all the plumbing (and have room for an external overflow box to be built on the back of the tank) to conseal it from view, painting the back of the tank is usually done with these setups..

greenmaji · 10-08-2005, 10:04 AM

to get an idea.. hear is a pic of someones project in planing I found..

10-06-2005, 08:58 PM	#1
hannibal_lector Aquarium Advice Apprentice Join Date: Oct 2005 Location: trenton nj Posts: 13	Garf stand problem-will it fit? I did the garf page and want to upgrade my stand from 28"tall to maybe 38" or even more...(for 55gal) The problem is that I also want it to be wider because it dawned on me to just build a stand that looks nicer AND can fit a sump in it. The stand I have now is less than 12" deep inside so I cant fit any standard aquarium as a sump. Since I'd like a better taller stand anyway this works better than both building a sump and a cabinet for it... ANYWAY ON TO THE PROBLEM! which is that I set the depth as 16" but that would I'm guessing be structurally bad because the weight would be off the sides and on just the center posts...so I need a way to reinforce yet keep it wide?!

10-07-2005, 01:25 PM	#2
mp3z24 Aquarium Advice Freak Join Date: Jan 2005 Location: Chicago Suburbs Posts: 318	so, are you building a stand for a 55 gallon tank? im confused. also, is this a glass or acrylic tank? anyway, if you are building one for a 55 then listen up. i made a 2x4 frame to support the entire base of the tank, and a 2x4 frame to sit on the floor. my tank is glass, but this stand should work for an acrylic also (as long as you make a flat top for the complete tank to sit on). at the corners, i used 2 2x4's standing on end, and i screwed them together to form an "L". these were the legs that went between the top 2x4 frame and the bottom 2x4 frame. i used some heavy duty corner bracket (NOT those dinky little L brackets) to secure the legs to the 2x4 frames. I also added a vertical 2x4 in the front to break up the front face and provide an opening for my doors. if you use 2x4s you shouldnt need a brace in the front or back... but like i said, i added one for aesthetics. so, if you build the basic box frame for the stand, then you can use whatever you want to increase the outside dimensions. just remember that the parts that hold up the tank need to be sturdy. the center vertical braces are not needed for a 55 gallon tank stand made from 2x4's. i hope this makes sense... if you have questions post a sketch of what you want to build. edit: i used Simpson Strong Tie part RTA2Z for my corner bracing... http://www.strongtie.com/products/connectors/RTC.html ~mike __________________ 55gal [acronym="Fish only with live rock"]FOWLR[/acronym], [acronym="Do it yourself"]DIY[/acronym] stand and Hood, AquaC Remora, Coralife Lunar Aqualight (4x65W), 60 LB Hirocks Base Rock, 40 LB [acronym="Live rock"]LR[/acronym] 50/50 Keys/Gulf 150 LB Playsand (~3-4 in [acronym="Deep Sand Bed"]DSB[/acronym]) 2 x Blood Red Fire Shrimp, 2 x Cleaner Shrimp 2 x Black and White Percula Clown, 1 x Orange Spotted Blenny, 1 x Red Stripe High Fin Goby

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can't fit the sump under the stand!!!!!!	austinsdad	DIY Projects	3	09-30-2006 08:12 AM
My attempt at a GARF stand!	Keeper	DIY Projects	17	01-14-2006 05:29 AM
Going to build a GARF stand.	William	DIY Projects	7	08-04-2004 10:24 AM
My attempt at a 55g GARF stand	JeffProe	DIY Projects	12	07-09-2004 05:55 PM
Going to build a Garf Stand this weekend.	William	DIY Projects	8	03-14-2004 12:55 PM

10-08-2005, 01:45 AM	#3
greenmaji Aquarium Advice Addict Join Date: May 2005 Location: Central Kentucky Posts: 5,937	Im thinking that Ive seen stands build that are wider then the tank in order to make room for all the plumbing (and have room for an external overflow box to be built on the back of the tank) to conseal it from view, painting the back of the tank is usually done with these setups..