I have submitted a dealer request to Fulham and should hear from them after the first of the year. If it is approved, and I expect that it will be, I'll have the Fulham line on my site. If you want one right away, I believe you can find them at www.reefgeeks.com
. I don't think you'll be happy with the performance of the 2x96 HO
ballast. You could use a pair of 4x32's for two 96w PC
's, but I think the Workhorse 7 is a more economical solution.
You can use either the GE 2x32 or the Sylvania 2x32 ballast to light the LOA bulb. You will need to disassemble the bulb and remove the starter from the base. Then solder the wires back together. Then you can run it on the regular ballast. There was a post that dealt with this in more detail, but it seems a fairly straightforward procedure.