Recent content by Ga1981

Also if you look at the air bubble in pics 1 is bigger than the one on pic 2, never happened to me, usual I the air bubble is the same from start to finish,is nothing to get confuse about, I think that fluid missing is in the pink tip

Also calcium and alk are like that... The instruction say the air bubble is normal..... If you stop the end of the piston at 1ml mark, your reading is going to be at the end of the piston not the end of the fluid, air bubble is normal due to the tip you have to install at the end of the siringe

Yeah those are too many changes in a short period of time, but the mag so high should be ok, my friend suggested me to got the mag to 1500, but I aim to 1300/1350, just wait a couple of days and test again, I don't know about lowering mag , most of the time is the opposite, maybe a water...

I don't know, just wait a day or 2 and test again.... Should be fine, how the corals look? Sent from my iPhone using Tapatalk

Ok then, is good. The mag seems a little high , but yes that air bubble is going to be there all the time because that tip, and doesn't affect the test result

It's fine, the air bubble is going to be there all the time because that tip you have to put on the siring e, but in the second picture there is not air bubble why?

For fish I recommend you to check liveaquaria.com you can find some good info there

You can contact the manufacture and ask about drilling holes in tank, you have to make sure the glass is not tempered, if glass is tempered you can only use the hang on back. You need a sump, a return pump, lights,skimmer,power heads and a heater for hardware.....also for 75 g you need like 1...

+1 on this

No is not bad ... So the tank is not a reef ready, means you have to get an hang on back overflow box... Well I use one of those, nothing wrong with them, but honestly my next tank will be reef ready,cause my overflow lost syphoning when I was away, and that was not funny..... That's why now I...

Nice, are the tanks drilled?I mean if there are holes on the glass panel.

I use a cpr overflow, and I m happy with it,but 2 weeks ago the aqualifter broke due to a power outage and for 2 days had no circulation.... I was away at the time, so make sure you always have a spare aqualifter with you.... But IMO if you have the opportunity to drill the tank, I suggest you...

Make sure the panel you going to drill is not tempered glass

The light opposite cycle help stabilize the ph,just shake the Cheato in a bucket the deads should came off or pull it of by hand.... That's does not guarantee the Cheato to grow. As mr _X said not everyone can grow Cheato , but in my experience I made a couple of changes and now I able to grow...

But I also saw people with beautiful tank that can't grow Cheato