Search results

The friendliest place on the web for anyone with an interest in aquariums or fish keeping!
If you have answers, please help by responding to the unanswered posts.
  1. P

    Erythromyicin treatment for cyanobacteria (BGA)- yes or no?

    Hi there, For all its worth, I used to have BGA really bad and just did a 3-4 day blackout and not had it since, as long as nitrates are not bottoming out seems to be an easy cure....:D
  2. P

    Consistent Problem with BBA :(

    Hi, that's what I am doing at the moment - well have been for months really ha ha... Am taking on board the spot dosing suggestion - me thinks its much better - did my after pwc 5x dose this w/e and things looking better the next day - more pinkness around! Did the 2x dose as a spot dose also...
  3. P

    Consistent Problem with BBA :(

    I wondered it if was to do with the dying algae secreting 'nutrients' that feed the green algae (I assume it would be a good idea to do a pwc sooner rather than later for this very reason)? Hmmm...:-|
  4. P

    Consistent Problem with BBA :(

    Hi again I don't know whether anyone else using Excel has noticed this but I know I said the hair algae was definately going, well now that the BBA is dying (its definately going now!) the hair algae seems to be slowly growing again! Any thoughts anyone?! :rolleyes:
  5. P

    Consistent Problem with BBA :(

    Thanks for your ideas - I agree with you but I am hoping the SAE will help me with that problem (I have 4, 3 young one's which are eating like mad) now that the algae is pink - it is definately dying off though! I gave the tank a 3x dose this morning, got a bit carried away but the fish and...
  6. P

    Consistent Problem with BBA :(

    Hi all thanks for your post! So, after a week of 2x normal treatment (my last post) and a pwc I tried the initial dose as a spot treatment adding max vol of 5x Excel. The next day, the BBA that I treated on background and wood is definately pink, hooray! :) The following day I did a 2x normal...
  7. P

    Consistent Problem with BBA :(

    BBA is fairly bad - have alot of it on driftwood and my background. It was just growing back after I was pulling it off. Also have quite a bit on my foreground plants as they are v slow growing but not so much on the stemmed faster one's. Also have it attached to the few resident mini-snails as...
  8. P

    Consistent Problem with BBA :(

    Yes, the KH reading was in degrees, not ppm. I agree with you - it is a bit odd! Perhaps the tap water does have a CO2 level lower than atmospheric which is why the pH drops/CO2 goes up after sitting out, and therefore the pH/KH reading is not accurate (it is a dip test so would not surprise me)...
  9. P

    Consistent Problem with BBA :(

    No I'm not using anything like that - its a low light simple set up (40g (uk one's!) with 60w lights, quite a few stemmed plants and gravel). I do have a background that is a rock effect - not sure if that would do anything but prob not... otherwise no idea!
  10. P

    Consistent Problem with BBA :(

    Hi thanks for reply! I don't inject CO2 and my tap water after 24hrs out was KH 10, pH7.6. My tank is KH 10, pH8.0 which was the same as tap water straight out. I do have driftwood in there, however if tannins were being read as acid the CO2 would be higher?!:confused: It seems that tap water...
  11. P

    Consistent Problem with BBA :(

    Thanks purrbox, my CO2 levels are def below 30ppm if the calculator is to be believed, they are more like 3 (about KH 10, pH8.0) considering they went up to 8 (KH10, pH7.6) after standing out 24hrs (though I think that 8 cannot be right for water that has degassed, right?)... so may as well...
  12. P

    Consistent Problem with BBA :(

    Thanks for your reply! I'll go with the new kit - have been dosing NO3 as well, never mind! With the new lights and regular dosing of excel, the plants should take it up :confused:... or I could do a pwc...:-| I have quite a bit of BBA on my background and on the driftwood, the plants aren't...
  13. P

    Consistent Problem with BBA :(

    Ok, so I have now got new bulbs (which are lots brighter!) - am dosing excel and I also bought a new NO3 test kit (API). Yikes - My old Hagen NO3 test kit (5 months out of date!) said it was 10mg/L, the dip test said between 100-200 and the new one said 40mg/L!!!?? I have thrown the old one as...
  14. P

    Consistent Problem with BBA :(

    Hi Can I ask how much Excel and how often you dose with your wc? What they suggest on the bottle?! Thanks
  15. P

    Consistent Problem with BBA :(

    Hi Thanks marchmaxima - I think my phosphates are fine tho... Just tested some tap water that I'd left sat out o/n - the pH went to 7.6 which seems that the co2 then is up to 8 meaning a low CO2 in the tap water? Also the dip test said the No3 reduced (but not sure I believe that).:mad...
  16. P

    Consistent Problem with BBA :(

    Both! I have a major problem with BBA but as I believe tap water has NO3 of 0 - I think that's why BGA is surfacing?
  17. P

    Consistent Problem with BBA :(

    Hi again, Just tested tank and tap water, both were: NO2 0mg/L GH about 14d KH 10d pH 8 (so not helping BrianNY!) Interestingly, the dip test said NO3 was 200 (!) in tank water (as i said before I added nitrate as I thought it was too low) and about 100 in tap water - however I also tested...
  18. P

    Consistent Problem with BBA :(

    Hi Thanks all for your help - After all the reading, I also came to the conclusion that some of it may be due to not degassing the water and will be trying that. I haven't tested the pH (test kit on order as ran out) of tap or tank water since moving, but I am thinking that water changes...
  19. P

    Consistent Problem with BBA :(

    Hi all, I have read and read about BBA and can't find anywhere that really helps with how to get rid of BBA without contradicting each other. Since moving, my 40g tank has got BBA and I am constantly picking it off but want to sort it out for good! My NO3 was 5ppm, PO4 0.5ppm, NH4 0ppm. I dosed...
  20. P

    Help! Algae and ferts and levels!

    I use 2X 5ml twice a week and about 7ml once a week on 3 separate doses. Went well on that for about 6 months, then got algae and tried reducing dose to 10ml/week which seemed to make it worse... I use the one with N and P, as I have few fish. I started using this as I got some cyano cos my N...
  21. P

    Help! Algae and ferts and levels!

    I have a juwel multilix system with warm light and bright day lite tubes, both 30W.
  22. P

    Help! Algae and ferts and levels!

    I am currently struggling with a hair algae problem - my PO4 was 0.25 to 0.5 and nitrates 10-20 ish. I have been using Nutrition + liquid from tropica for at least 6 months with no probs until now. My plants are also looking yellow/light and have seemed to stop growing? Anybody have any...
  23. P

    Staghorn and Beard Algae

    Ammonia is all sorted out now :), I tested it again and its 0. Still have a little staghorn, so need to clip leaves tonight during weekly clean-up. What is the cause of hair/thread algae? I don't have alot but it is still there despite me removing it. I believe the brown diatoms are slowly...
  24. P

    Staghorn and Beard Algae

    Hi there, thanks for all the help. I def have staghorn and probably hair/thread algae - i did some tests and the ammonia is slightly raised which it hasn't been since startup, but I did recently change one of the filters at the bottom of my Juwel filter, so maybe its just due to a lack of good...
  25. P

    Staghorn and Beard Algae

    Hi, I have a ~30g tank that is pretty heavily planted and they are all growing well, but I have a small problem with some staghorn and beard (long green strands?) algae, and I usually pull it out during my weekly WC and clean up... BUT I was wondering how I could sort it out!!! Or what may be...
Back
Top Bottom