Search results

The friendliest place on the web for anyone with an interest in aquariums or fish keeping!
If you have answers, please help by responding to the unanswered posts.
  1. Dmann

    Post your full tank shot here.

    Sent from my SM-N920P using Tapatalk
  2. Dmann

    Post your full tank shot here.

    60g cube. Almost 2yrs old trading out lps for sticks lately Sent from my 831C using Tapatalk
  3. Dmann

    How does an overflow work

    These will work dino
  4. Dmann

    Cycling

    If you used live sand and live rock your tank wont have much of a cycle. Do a 20% water change to lower your nitrate. Test it again. Your nitrates should be under 10 And your good to go. Add some fish dino
  5. Dmann

    Cycling

    No dont put amonia in the tank if you have nitrates dino
  6. Dmann

    How does an overflow work

    Drilling is easy. Just go soft and easy. If you dont want to drill the sump. You can make a bracket to hang on the side of the sump to hold the float valve.im gonna make one using magnets and acrylic to hold it in place. dino
  7. Dmann

    How does an overflow work

    mr. X if you use the float switch method. The contair could go on the ground. And dont put the end in the water. Chevy. There is a bulkhead fitting on the float valve. Drill a small hole in the sump where you want your water level. Install the float valve with the float inside the sump. The...
  8. Dmann

    Durso Standpipe

    Oops. 2 elbows and 1 cap. Drill hole in the cap dino
  9. Dmann

    Durso Standpipe

    Put the reverse durso on the bottom side into the sump. I guerentee it will stop. Its suging because its not getting enough air escape. The reverse allows all the air to escape as needed. Allowing water to flow freely. Cost me like 10$ at lowes. Pvc pipe. 1 pvc T and 1 elbow dino
  10. Dmann

    How does an overflow work

    You can also order a float switch off ebay and splice it into an extension cord that a small pump is plugged into. Set the float valve at your level in sump with the pump in the ato container. And hose run to the sump. When the float drops it will kick the pump on filling the sump until the...
  11. Dmann

    How does an overflow work

    I just ordered this. You run the line into it and set it at the level you want in your sump. As long as its higher than the sump you can hang it In the garage from the cieling if you want. Just make sure you keep it clean so to not clog with salt creep. dino
  12. Dmann

    Durso Standpipe

    As long as its working properly. dino
  13. Dmann

    Durso Standpipe

    The top should be out of the water a little bit with a hole in it to suck air dino
  14. Dmann

    60g rimless cube build

    They are 169$ shipped dino
  15. Dmann

    60g rimless cube build

    Ive been looking at led s especially the ones on ebay and a website call www.reefradiance.com that sell full spectrum led 2ch dimmable. Just havent decided yet. dino
  16. Dmann

    Flushing/Surging of water into sump

    I made a reverse durso for my overflow to quiet it down. Worked really well I was getting the same thing. Flushing ang gurgling. Made the reverse durso under the tank. Make sure there is a nice hole in the cap. and the elbow is halfway submerged in the sump dino
  17. Dmann

    Best place to buy DR

    Marcorock is nice and inexpensive dino
  18. Dmann

    Durso Standpipe

    You really dont have to glue overflows. Makes it a pain in the *** to get snails out. dino
  19. Dmann

    Durso Standpipe

    I built a reverse durse for my overflow to the tank. No more gurgling or flushing dino
  20. Dmann

    Best protein skimmer

    I have a reef octopus nw110 everyone I asked recommended it. Working great dino
  21. Dmann

    60g rimless cube build

    I made a reverse derso on the bottom of the overflow to quiet it down. Worked really well Next is lighting and keep adding live rock. Im thinking about doing a 4 bulb t5 fixture dino
  22. Dmann

    60g rimless cube build

    Glass is dirty. Pair of dark oscillaris clowns dino
Back
Top Bottom