Search results

Thanks for that advice, I believe most likely it is counter clockwise for the removal but I'll be careful. Might be wise to go ahead and purchase some pvc and ball valve just in case something goes wrong or broke haha, better safe than sorry.

I was thinking that myself too but wasn't sure if it was possible to unscrew and I didn't have any available pvc left if I were to break the valve and have no way to redo my plumbing haha but thanks 54seaweed for that advice I will for sure to do it tomorrow after work and hope for the best

I can turn off the return pump temporarily as if I'm doing a water change but I have yet to find information on how to get into the O ring. Looks like I have to bite the bullet and redo my whole plumbing. I'm a fan of gate valve but a lot of people have been mentioning ball valve and may have to...

No luck as of yet but still looking on how to replace the O rings. Sucks I may have to tear down and redo my plumbing again lol

Good afternoons all, I'm hoping someone can help me with my leaking gate valve, if it is closed about 60-70% it doesn't leak but if it's opened to about halfway it will start to drip. I was able to remove the screw and the handle but how do you remove the inner piece so I can check and maybe...

It is Cheap and with patience and help, overall it is worth it and at the end you're going to say to yourself...yep I built this on my own. Most of everything I learned and built is from YouTube and online forums :) you will not regret building it yourself

Here is the 55 gallon build of the stand for his freshwater tank before he converted to saltwater

That sounds like a frustrating issue and I was in your shoes when I convinced my friend to switch to saltwater hobby. His stand does not sit flush either and no matter what we tried it never became a permanent fix so I advised my friend to build a stand ourselves and we carefully measured...

But I did changed the 29 gallon sump and modified the 40 gallon breeder tank...it was 5 inches too wide to fit so I broke down the tank cut 5 inches and resealed the tank :) happiest and successful diy I performed so far. It's Been over 6 months now and no leak to the newly modified sump

Offended_fish - I agree that goldguru explained it perfectly. When I purchased this tank and stand the plumbing was already built and I was fairly new to the saltwater hobby so I just left it the way the previous owner did since he had years of experience and his upgraded tank was phenomenal. I...

No problems with it, but I do a monthly cleaning or every bi-monthly. I am happy with it and wouldn't hesitate to order again if needed

+1 on what goldguru stated. I personally purchased two jebao powerhead at different times, the first powerhead says rw on the box but my second one says pp on the box. Nonetheless, both pumps are working fine and I can't be more happy with the price of these pumps

That is a very detailed instructions and is exactly the answer I was trying to find, thank you goldguru!! I will try it out and hope it's easy fix

Thanks coral bandit, the screw on the handle is tight but I hope it's a seal or o ring that can be replaced instead of replacing the whole gate valve

Here is the exact point where the leak is coming from

Hello fellow reefer! I need help with my leaking gate valve. I re-did my plumbing and just finished gluing all my pvc but noticed a slow leak inside where the handle is. I would hate to break it down and redo it but before I do that, is there any miracle chance I could take off the handle and...

Cool! Thanks!! I'll have to think of away to Make it where if it jumps into the mesh, he'll be able to get back into the display tank and not be stuck on top of the mesh lol Sent from my SAMSUNG-SM-N915A using Aquarium Advice mobile app

Where can I get one of these mesh? Sent from my SAMSUNG-SM-N915A using Aquarium Advice mobile app

Melosu58 that's an awesome idea I can use the mesh to cover my overflow so my 6 line won't get in there Sent from my SAMSUNG-SM-N915A using Aquarium Advice mobile app

That sounds like a good idea and I do have some leftover egg crate laying around but my 6 line is still pretty small about an inch long and I think he may be able to squeeze into the slot of the overflow and not Jump up into the overflow but I will definitely try the egg crate method. Thanks...

Hello to my fellow reefers! I am having issues with my 6 line getting into my overflow and down to my sump. Twice I thought he was either missing or dead but then found him in the return section of my sump. Anyone have any tips tricks or pointer on how I can stop him from getting into the...

I thought it was a pocillopora also but not sure and awesome I was looking into them too. Never had acros yet only Monti caps and digitata. I'm starting to become a sps fanatic now that I found the love for this hobby again. Thanks bribo12 for the ID!! Sent from my SAMSUNG-SM-N915A using...

My phone does no justice, sorry in advance for crappy pictures but what kind of sps coral are these? Saw these at my friends tank. Looks very interesting and looking into them but want to know more information on them before I buy. Thanks! Sent from my SAMSUNG-SM-N915A using Aquarium Advice...

That's a great point greg, but lately after seeing numerous asterina starfish I haven't seen much of pink algae growing anymore but I have been doing more water changes lately so hopefully it'll start growing again. Thanks, that is a good advice to point out :) Sent from my SAMSUNG-SM-N915A...

I also think 400 is fine but considering I started to get sps corals I may need to bump it up soon, only sps I have currently are montipora cap about 2 inch diameter and a birds nest frag, then I have 2 frogspawn lps coral. Sent from my SAMSUNG-SM-N915A using Aquarium Advice mobile app