Are these RODI numbers good?

[rdefino]

My tap water reading 271. After I process it through the RODI I get 51 to 70. The waste water is 205. Is that good?

Thanks

 

[greenfish]

My tap water is 250-400 (fluctuates a lot that's why I got RO/DI) but after it goes through my 5 stage RO/DI it reads 0 or sometimes 1.

 

[seaham358]

No thats not good for a ro/di...... It should be 0 with new filters. Do you have a RO or RO/DI unit and who makes it and how many stages.

 

[rdefino]

This is the model, Got it from ebay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=4332206729&ssPageName=STRK:MEWN:IT

It's a 6 stage.

 

[greenfish]

I think you should definately be getting some better results. I know that after mine goes through the RO it is down to about 40 or so and then 0 after the DI. I'm sorry I'm not much help in fixing your situatution. Hopefully someone else here has some ideas.

Have you contacted the seller? Maybe he has some suggestions. Good luck.

 

[seaham358]

Something must not be hooked up right. You should be in the single digits to 0 with a new unit. Run it a while and see if it gets better after it breaks in.