Recent content by martellmike

A volkswagon might be a closer weight.

the filter material order should be 1 - mechanical to remove any debris 2- biological to convert toxic chemicals to less toxic 3- chemical to remove chemicals that are not biological in nature having air in the filter after media change or when new is most probably some air pockets or air...

Yes only the chips will burn out, not controller or power supply. Most less run at less than 12 volts. They're made to be connected in series to totally draw the 12 volts. I would test the LEDs with a 1.5 volt flashlight battery first. Sent from my A1-840 using Tapatalk

You could use the rgbw chip. Just don't hook anything to the w+ or w- connections on the board. Sent from my A1-840 using Tapatalk

Your color controller is for red green blue. Only the rgb chip will work not the rgbw one. 12v red and black go to the red black inputs to color controller. Red green blue outputs each go to corresponding red green blue + sides of the chip. The red green blue -- sides of the chip will ALL BE...

Sent from my A1-840 using Tapatalk