Changing Nano Cube 12 gal light

[Maui No Ka Oi]

I need some help, I have a 12gal Nano Cube (standard) the bulb just poped and I have a new bulb to replace it with, but I have no box or instructions....the problem is the bulb has 4 pins with no markings, and there are 4 connectors on the hood, 2 are blue 2 are red, im not sure what goes where.....I bought this set up used about a year ago and only set up now, about 20 min after I turn the light on it pops, so im guessing the first owner didnt hook it up right and I dont want to make the same mistake.....Please Help and thank you in advance...

 

[dskidmore]

The manual is not very helpful.

The troubleshooing document isn't much better, but you might follow the directions for replacing the ballast far enough to see if there is a wiring diagram printed on the side of the ballast.

 

[Maui No Ka Oi]

Thanks for your help ive never seen the troubleshooting doc before, its pretty helpful, although they dont show what wires goes where it seems like it dont matter, but to be safe ill contact them with the info from the doc.....mahalos for all your help