TankBoss said:All I have to do is take it out, rinse, put back in. That easy.
AquaticAl said:I'm looking into building something similar. How did you attach the bottle to the pump? Also, what type or sponge is that and where did you get it?
ilostnemo said:While taking out all the ceramic media?
Jill said:I put my ceramic rings in a mesh bag just for ease of removal when I clean my canister and my HOB. Not that it's really that big of a deal to remove them either way.
Flipmikeskater3 said:I found a old household fountain in my house so I'm gonna just take the pump out of it and try to make one of these filters! I'll post picture if it works
TankBoss said:Sweet. Don't electrocute yourself. I would be very fearful about submerging a pump that was taken out of a fountain.
Flipmikeskater3 said:It is submersed in the fountain so it be alright
Good idea. I should start doing that.
Jill said:Makes it super easy to seed a new aquarium too.
Ukdans1k said:Just thought I'd chime in..
Instead of buying filter floss from your lfs, buy a cheap pillow from a cheap shop, stop cover and you have a large bag of floss, just make sure you rinse well before use . !!!!
Also look on YouTube moving bed filters
The cheapest way to make one is using a. Spring water or cola bottle upside down.
Drill wholes around top and bottom rims, fill will cut up straws and drill a whole in the cap To fit air tube. Takes a while for it to work properly but really good at biological filtration. If you require mechanical as well you can simply use 1 inch pipe with an elbow from a DIY store to add sponge.
Use k1 filter media instead of straws for better bang!!! But really cheap and effective. Heres the link
Fallout801 said:Many people like DIY just so they can say they did it, gives them something to do, and it's in their blood to create and explore possibilities. Cost isn't always the most valuable part behind an idea.
Fallout801 said:Many people like DIY just so they can say they did it, gives them something to do, and it's in their blood to create and explore possibilities. Cost isn't always the most valuable part behind an idea.
Labenator65000 said:Yea, I agree as well. I'm DIY-modding a Lee's Aquarium Gravel Vacuum to make it fit my service sink faucet (it has an odd-sized outer thread) and to add 25' of hose to it. I was planning to DIY the whole vac from scratch, but my family surprised me and purchased the kit for me. I wasn't sure if I was happy or disapointed. I guess I can get the satisfaction of some DIY for the mod at least.
I have been on the lookout for the right materials for a DIY overflow/sump wet-dry filter. I've been champing at the bit for weeks to get started.
I can realy appreciate your DIY filter. I may just do something like that for my 20 gallon community tank. You know, a little tank-safe black (etc) paint on just one side would make it less visible, and you could still just turn it around to inspect the media. Nice job.