Super_Blueberry
Aquarium Advice FINatic
So recently I noticed that my solenoid on my regulator wouldn't close when power was removed. I called Milwaukee to see what repair procedure was he had me run a couple tests on my setup. Turns out that my diffuser/atomizer is the problem. He suspects that it has become clogged with dust or other debris over the past couple years and is requiring too much pressure to push CO2 through it. This back pressure causes the solenoid to 'stick' open regardless of whether there is power to it or not. His suggestion was to either clean the diffuser, which I don't really see how to do that effectively, or replace it with some type of reaction chamber such as instamix. What type of in-line reaction chamber have you used that will work on 406?