I decided to try and build a standard co2 reactor since I am not happy with the way the cerger reactor turned out.
Here is my plans let me know if you think something should be changed before I start to glue.
Overall I am thinking of making this about 18".
From the top down.
1 1/2 to 3/4 bushing
2 inch male to 1 1/2 female slip
2 inch slip go 2 inch female
Sewage clean out out T all sides slips.
Right side is a 2 inch to 3/4 bushing
Empty space will be 2 inch pipe
2 inch coupler
2 inch to 3/4 bushing.
The co2 will come in from the right side. I picked a sewage clean out trap that had a small angle thinking it would force the co2 up towards the water flow and help dissolve more.
I am not 100% on that logic though.
He reason for all the joints on top is I will be able to inscrew the top if I need to service the reactor ever.
Thoughts?
Sent from my iPhone using Aquarium Advice
Here is my plans let me know if you think something should be changed before I start to glue.
Overall I am thinking of making this about 18".
From the top down.
1 1/2 to 3/4 bushing
2 inch male to 1 1/2 female slip
2 inch slip go 2 inch female
Sewage clean out out T all sides slips.
Right side is a 2 inch to 3/4 bushing
Empty space will be 2 inch pipe
2 inch coupler
2 inch to 3/4 bushing.
The co2 will come in from the right side. I picked a sewage clean out trap that had a small angle thinking it would force the co2 up towards the water flow and help dissolve more.
I am not 100% on that logic though.
He reason for all the joints on top is I will be able to inscrew the top if I need to service the reactor ever.
Thoughts?
Sent from my iPhone using Aquarium Advice