The friendliest place on the web for anyone with an interest in aquariums or fish keeping!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
Fitting the background was also a reasonably straightforward job. Firstly I measured the inside dimension of the tank, and then using a sharp knife,
Next I fitted the back and floor panels cut from the marine ply. Note that the stand is upside down in this photo and has been painted.
Unfortunately I neglected to photograph the fitting of the panels; thankfully it’s a pretty straight forward procedure. Basically I used construction
Instead of using polystyrene I decided to use black rubber floor mats for the tank to rest on. The mats are easily cut with a sharp knife and a steel
Fitting the background was also a reasonably straightforward job. Firstly I measured the inside dimension of the tank, and then using a sharp knife,
Hooked on Fish

Fitting the background was also a reasonably straightforward job. Firstly I measured the inside dimension of the tank, and then using a sharp knife,

Media information

Album
Building a Custom Aquarium Stand
Added by
Hooked on Fish
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top Bottom