Recent content by snorkel

Full tank pics here

The Hardware

You would have to save it to your PC, then upload it to your gallery. start another thread so we don't hijack this one.

How did that method work for the stand? Got any pics?

Update, almost done The flash made some of the pics appear redish, but it's more brown in person. http://www.amsoftwaredesign.com/one.jpg http://www.amsoftwaredesign.com/two.jpg http://www.amsoftwaredesign.com/three.jpg http://www.amsoftwaredesign.com/four.jpg

1x4s are easier to work with because they are generally a much higher grade. The pine I used is select grade Radiata pine from New Zealand and has 0 knots. When you start out with square wood, it's going to be easier to get a finished cabinet that is square and true. I was really lacking time...

This would be a better option: Finnex 300W Titanium Heater with HC810 Digital Controller - AquaCave Not that much more than the m200 and would provide a better overall experience with the external controller. I have found that the titanium heaters radiate the heat much better than the glass...

A lot less that 400 dollars :-) (which a nice stand from the LFS would cost) The wood is from Menards and is the select grade pine 1x4s. I have not added up the receipts, but it's less than 100. It's taken a fair amount of time to create this though. It would have been far easier to...

Everything is pocket screwed as well as glued, so the standard carpenters glue is fine, it will also be well coated on the inside and out with poly. Gorilla glue is not good for wood joints because it expands big time while it cures. You would have to soak cured carpenters glue for a long...

Thanks :-) I agree, hardwood like oak is nicer, but the cost for oak is double the cost for the pine and the clincher was the pine was completely knot free. The biggest con is the softness of the wood when something hits it. You don't have to worry about strength, the compression strength for...

Been working on this for about a week or so now in my spare time. The back is stapled on 1/4 inch pine plywood finish sanded one side. Top is 1/2 inch one side sanded pine plywood. Bottom shelf is 3/4 inch plywood. The rest is 1x4 select pine boards from Menards. The top trim is a routed...