Search results

I've been thinking about building up a DIY flow meter for my return pump, to see what it's actually putting out, and be able to tune my system a little better. However, I don't have an Apex, and I'm not about to plunk down the $$$ on one, plus the extra for the new flow meter kit they have...

Which do you guys use/prefer? I'm seeing some pretty wild variations test to test with my Hanna Checker (on the order of 75ppm difference between consecutive tests). Are the RedSea tests better/more accurate/more consistent?

I was wondering if anyone here has any experience with shipping corals (specifically thick branching frogspawn). What needs to be done w.r.t. packaging, heating/cooling, amounts of water, etc? Thanks in advance.

Long time since my last post about my tank, but here's an up to date picture of the tank, still going strong. Corals and fish are all thriving. Unfortunately, had to trim the kenya tree and toss a large portion, but it's doubled in size in two weeks, so pruning will happen again soon. My...

I have an established cleaner shrimp in my tank, and decided to toss another one in yesterday. They were getting along just fine until about 10 minutes ago when I saw the larger one tear the new one in half. Is this common, if not introduced as pairs, the existing one is dominant over the new one?

I have a HUGE kenya tree (cauliflower colt) coral I'm looking to frag. Basically, each roughly circled area is a $10 frag. Larger pieces available upon request as well.

I have a *huge* kenya tree coral, and I've tried selling frags, however there are no folks interested locally. I don't want to do the cut 'n' toss, but it's gotten to the point where it's taken over a large part of my tank. Does anyone have any advice on what to do? You can see it here:

I found what I think is an aiptasia in my tank (posted in the ID forum last night). My question about getting rid of it is when people say they "inject" with lemon juice, boiling RO, aiptasia x, etc....do they actually mean using a hypodermic needle, sticking it and injecting into the thing? I...

Just noticed this..is it aiptasia? I haven't added anything new in months and this bugger appeared in the last week. Can i just cut him off the rock or scorch him with hydrogen peroxide? I don't see others...yet. Sent from my SM-G900P using Aquarium Advice mobile app

I have a branching frogspawn that's gotten HUGE and need to frag it and sell some pieces. Would using an oscillating tool on the brown (hard) parts of the branches work well? How hard is that section (ie, will i need a special blade, etc)? Thanks in advance...

I picked up a new diamond watchman from the LFS the other day. I don't have aggressive fish in the tank, but he insists on skimming the top, the jumps into my overflow box (it's a BeanAnimal overflow box, pix can be seen in my album). He's in no danger in the box, but it would be nice to have...

My tank is up to about 80 degrees (I like keeping it at 78). I'm debating purchasing a "purpose built" aquarium fan for cooling, or to just use some DIY solution (small desk fan, etc). Tank is 40 gallons, 20 gallon sump. I'd be mounting the fan on/near the sump so the DT stays "clean". Does...

I have a spare LED from BuildMyLED (may they rest in peace) that I used on an older, smaller tank. I want to utilize this light on my 40 now, but don't want a hanging fixture. My existing fixture rests on the rim (another BML light with the rim mounts). I'm thinking of using a PVC pipe with...

Or both? Reef Frenzy looks great, but my guys love PE Mysis. Is it worth the 1hr drive to the nearest place that stocks Reef Frenzy to give it a shot?

Any idea what crab this is and if it's reef safe? Came on a monti... Sent from my SM-G900P using Aquarium Advice mobile app

I have a couple of old smartphones laying around that I'd like to repurpose as webcams to keep an eye on my tank, or just pull it up while I'm at work to "zen out", so to speak. What I've noticed, however, is that I need to position the phone about 2ft out from the tank to get the entire...

I have my heaters controlled by a Ranco ETC. Should I put it's thermocouple in the sump, where the heaters are, or in the display? I currently have it in the display, but I'm wondering what other people think about this, and why.

Nothing we didn't already know :)

Picked this skimmer up two weeks ago from BRS. The instructions kinda stink (thank goodness for youtube), but after 10 minutes, I had it assembled. In less than an hour, it was pulling all sorts of nasty skimmate from the sump. I can't recommend this skimmer enough, especially if you're tight...

I have an aqueon stand for my tank, and the BRS mini-reactor is in the sump. I'd like to lift it out of the sump, and mount it to the inside of the stand. Is it OK to drill two small holes for screws to mount to the stand? I don't want to compromise the structure of the stand, for obvious reasons.

Just a heads up: PetSmart Expands Recall of Fish Bowls Due to Laceration Hazard | CPSC.gov Sent from my SM-G900P using Aquarium Advice mobile app

I'm running a beananimal overflow on my tank...are filter socks a good idea with this type of overflow? If not, what are some viable alternatives to get particulates out of the water? I'm already using a BRS mini-reactor w/ carbon...

Due to space constraints, my sump is fuge-less. What's the best way for me to raise pods? Can I just add some to the DT and hope for the best, or should I do the mason jar in the sunlight route? Also, with my current stock of fish (clowns, damsels, goby) and the corals I have (see my 40 in...

I'm selling the following items. All are 100% functional. I've migrated to a larger tank and no longer need these items. Prices are negotiable, but please don't low-ball. Obviously some of these are best for local pickup in/around the Deptford, NJ area. Others can be shipped, but you will need...

I need to seal a joint between one of my sump baffles and the sump. I'd rather not drain the thing and run without it for 24 hrs if it can be avoided. Are there any sealants that can be applied underwater that will cure properly? Will reef-safe epoxy bond to glass and acrylic?