eatsomepopcorn
Aquarium Advice Freak
I need some ideas on how to level my new 120G Marine Aquarium. I had a custom build wooden stand built with canopy and I realized that my floor not exactly level from side to side, but it is level front to back. The floor is commercial ceramic tile and I am off 5/16 of an inch across the front from left to right over a 5 foot span. The stand is 5 foot by 18 inches. I do not want to put shims under the stand because my wife will kill me because the room that it is in is a nice office and it needs to look professional. I have 3/4 plywood that the aquarium sits on on top of the stand with a center board that is about 4 inches wide that runs front to back - otherwise it is open. The tank has two acrylic overflows center on each side from the center of the tank. I am worried that 5/16 is too much to be off on one side for the overflow, but also since I am setting up this new tank for the first time, I thought I might as well do it correctly. Your help is appreciated, especially if you faced this yourself and solved it.