stryder said:
My
KH reading is in the 180 range!!! more buffer??
Your alkalinity is a little high but nothing to panic about 180
ppm = 3.6 mEq/l
I had my
lfs test it and they said it was 7.3. When I got home I added 2 tsp of buffer. Am I on the wrong track or what??
Worse thing you can do is get the
LFS to test pH. Once the sample is removed from the tank it needs to be tested in a timely fashon. Once transported, no matter what distance/time, the sample becomes "contaminated" so to speak. If covered,
CO2 can becomes saturated and depress pH giving a low reading and if uncovered the reverse is true. The sample becomes aerated thereby increasing pH values.
You are better off taking your
test kit into them and doing a comparison on their tanks water to help you interpret the results.
What brand of kit do you use? Bluish -green will usually mean a higher end reading (Salifert) not lower. Just be sure you let the test vial air dry before using again with your tanks.
In any event, with the above average alkalinity reading, more commonly the problem will be as others have pointed out, improper tank aeration. This is not just limited to a tank being covered. It can also be from improper total tank aeration (not enough total
GPH) as well as poor room ventilation, especially in winter months when the doors/windows are often kept closed 24/7.
One problem you will have is from low salinity. Chemsitry is often harder to maintain when the salinity is kept at lower values. You are doing yourself no favors by keeping it below 1.025
SG. If you have a refractometer, target 35
ppt. Be very careful how quickly you raise the salinity. Teleost marine fish do not handle fast increases in salinity. It must be done slowly over several days no more than 0.001/day. Allowing it to evap down and topping of with the desired salinity water is the easiest.
Cheers
Steve