I have a 90 Gallon Reef Ready AGA Tank, and a Aquaclear 200 sump below the tank. My return pump is a Mag 7 that also passes through a turbo Twist 6X (18W) UV Sterilizer . I figure with about 4 feet of head going back to the tank and the 3 90 degree bends on the way back the flow rate is probably about 450 into the tank.
Is that too fast for the UV? Should I use a smaller pump? I would rather not have 2 pumps. I already have a mag 5 feeding my EV120 Skimmer in the sump?
What can I use to measure the flow rate?
Thoughts? Ideas?
Thanks
Phil
Is that too fast for the UV? Should I use a smaller pump? I would rather not have 2 pumps. I already have a mag 5 feeding my EV120 Skimmer in the sump?
What can I use to measure the flow rate?
Thoughts? Ideas?
Thanks
Phil