snorkel
Aquarium Advice Regular
Been working on this for about a week or so now in my spare time.
The back is stapled on 1/4 inch pine plywood finish sanded one side.
Top is 1/2 inch one side sanded pine plywood.
Bottom shelf is 3/4 inch plywood.
The rest is 1x4 select pine boards from Menards. The top trim is a routed ripped down 1x8 which I have to trim down in the back so it's flush. Will build the doors next from 1x3 inch pine and 1/4 inch !@#$ panels.
Dimensions:
48.5 inches wide, 18.5 inches deep, and 32.5 inches high.
Let me know if you have any questions on construction.
http://www.amsoftwaredesign.com/front1.JPG
http://www.amsoftwaredesign.com/front2.JPG
http://www.amsoftwaredesign.com/side.JPG
http://www.amsoftwaredesign.com/side2.JPG
The back is stapled on 1/4 inch pine plywood finish sanded one side.
Top is 1/2 inch one side sanded pine plywood.
Bottom shelf is 3/4 inch plywood.
The rest is 1x4 select pine boards from Menards. The top trim is a routed ripped down 1x8 which I have to trim down in the back so it's flush. Will build the doors next from 1x3 inch pine and 1/4 inch !@#$ panels.
Dimensions:
48.5 inches wide, 18.5 inches deep, and 32.5 inches high.
Let me know if you have any questions on construction.
http://www.amsoftwaredesign.com/front1.JPG
http://www.amsoftwaredesign.com/front2.JPG
http://www.amsoftwaredesign.com/side.JPG
http://www.amsoftwaredesign.com/side2.JPG