threnjen
Aquarium Advice Addict
So first off, yes I did run a search on regulators, and read lots of threads! But I'm still confused/undecided
I'm having a very tough time convincing my hubby to go to CO2 because he's afraid of the fish getting gassed. It seems like a somewhat reasonable fear due to EOTD.
I'm looking into my various regulator options. I would really like a dual stage regulator, because then I can better convince him that the tank will be protected from EOTD. But obviously, these cost a lot. Google searches tell me that people used to buy all these cheap Victor dual stage regulators on eBay but obviously, that age is over. I've also noticed from my searches that GLA dual stage regulators are very well regarded but shew... pricey!! I am sure they are worth it but just out of my price range
So here are configurations I have considered.
1) Basic regulator (Milwaukee, Aquatek)
New Premium Aquatek CO2 Regulator with Integrated Cool Touch Solenoid | eBay
http://www.amazon.com/Milwaukee-Instruments-Solenoid-Regulator-Counter/dp/B001DTNWF2
For reasons already stated, I probably won't do this option alone. I just can't risk killing hundreds of dollars of stock due to one bad EOTD, when I could just spend another hundred dollars up front to prevent it.
2) Basic regulator + pH monitor/controller
A regulator from option one, plus the Milwaukee pH monitor: http://www.testequipmentdepot.com/milwaukee/monitor/mc122.htm
It's my understanding from other reading that the solenoid plugs directly into this pH monitor, and then if the pH drops below a preset point (such as from EOTD, or even normal daily function?) it will turn off the solenoid.
So an electrical solution to a potential mechanical problem. Plus, would the pH monitor basically run the whole system on autopilot? Turning the CO2 on and off as needed?
3) Entry GLA regulator
GLA Gro CO2 Regulator | Green Leaf Aquariums
This is just a single stage regulator so I'm not clear how it prevents EOTD, although it claims to.
4) Dual Stage regulator + other parts needed
I found this one: Uniweld RHT8013 Medium/Heavy Duty Two Stage CO2 Regulator with CGA320 Inlet - Power Brazing Accessories - Amazon.com
Or other eBay dual stage regulators, but I wouldn't even know what to buy. But with these I recognize I will need to add a solenoid, needle valve and bubble counter.
5) ??? Anything out there dual stage for $200ish?
Opinions? Advice? Anecdotal evidence?
Thanks in advance
I'm having a very tough time convincing my hubby to go to CO2 because he's afraid of the fish getting gassed. It seems like a somewhat reasonable fear due to EOTD.
I'm looking into my various regulator options. I would really like a dual stage regulator, because then I can better convince him that the tank will be protected from EOTD. But obviously, these cost a lot. Google searches tell me that people used to buy all these cheap Victor dual stage regulators on eBay but obviously, that age is over. I've also noticed from my searches that GLA dual stage regulators are very well regarded but shew... pricey!! I am sure they are worth it but just out of my price range
So here are configurations I have considered.
1) Basic regulator (Milwaukee, Aquatek)
New Premium Aquatek CO2 Regulator with Integrated Cool Touch Solenoid | eBay
http://www.amazon.com/Milwaukee-Instruments-Solenoid-Regulator-Counter/dp/B001DTNWF2
For reasons already stated, I probably won't do this option alone. I just can't risk killing hundreds of dollars of stock due to one bad EOTD, when I could just spend another hundred dollars up front to prevent it.
2) Basic regulator + pH monitor/controller
A regulator from option one, plus the Milwaukee pH monitor: http://www.testequipmentdepot.com/milwaukee/monitor/mc122.htm
It's my understanding from other reading that the solenoid plugs directly into this pH monitor, and then if the pH drops below a preset point (such as from EOTD, or even normal daily function?) it will turn off the solenoid.
So an electrical solution to a potential mechanical problem. Plus, would the pH monitor basically run the whole system on autopilot? Turning the CO2 on and off as needed?
3) Entry GLA regulator
GLA Gro CO2 Regulator | Green Leaf Aquariums
This is just a single stage regulator so I'm not clear how it prevents EOTD, although it claims to.
4) Dual Stage regulator + other parts needed
I found this one: Uniweld RHT8013 Medium/Heavy Duty Two Stage CO2 Regulator with CGA320 Inlet - Power Brazing Accessories - Amazon.com
Or other eBay dual stage regulators, but I wouldn't even know what to buy. But with these I recognize I will need to add a solenoid, needle valve and bubble counter.
5) ??? Anything out there dual stage for $200ish?
Opinions? Advice? Anecdotal evidence?
Thanks in advance
Last edited: