Tobykourtney
Aquarium Advice Addict
- Joined
- Feb 16, 2013
- Messages
- 1,347
That's what I was looking at. The ocean revive one seems pretty good.
It will work. You will have plenty of spread with the 90 degree optics
Drilled the tank today. I ended up just doing a 1 inch intake. In going to use a 1/2 nozzle I already have to plumb a half inch return. Do you think a maxi jet 600 would be enough flow for a 20 gallon? The head pressure will be 16 inches.
We'll i over tightened the bulkhead and cracked the tank all the way down the side :-(
yes, when drilling delicate material with a hole saw always go from both directions, once pilot is thru opposite side switch direction to avoid splintering or blow out..Drilled the new tank and towards the end a small piece chipped off. Is this normal?