thisonefish
Aquarium Advice Newbie
- Joined
- Nov 25, 2015
- Messages
- 2
Why are the valves leaking when i turn them slightly to slow the water flow of the filter? they leak from the middle near the lever.
eheim 2213 valves leak when i lower water flow.
- Thread starter thisonefish
- Start date
The friendliest place on the web for anyone with an interest in aquariums or fish keeping!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
sealife
Aquarium Advice FINatic
Are you turning stop valves half closed to slow water, while filter is still running?
If so thats the reason.
Leave them on full open when filter is turned on.
I know alot of people say its ok to leave them half closed while filter is on to slow the flow rate. But, If you leave them half closed, while filter is on, the water puts too much pressure on the valves and leaks.
If you want to slow down flow, drill bigger holes in the output end pipe spray bar, or even take out the spray bar.
Sent from my SM-G920I using Aquarium Advice mobile app
If so thats the reason.
Leave them on full open when filter is turned on.
I know alot of people say its ok to leave them half closed while filter is on to slow the flow rate. But, If you leave them half closed, while filter is on, the water puts too much pressure on the valves and leaks.
If you want to slow down flow, drill bigger holes in the output end pipe spray bar, or even take out the spray bar.
Sent from my SM-G920I using Aquarium Advice mobile app
