Before attempting to change the pH of aquarium water, you should ask yourself if it is really necessary to do so. The pH range quoted for a given species may be based on its native waters. Although it might be desirable to mimic these conditions to some extent, the fish may be quite capable of thriving at a slightly different pH. It is also worth considering that many fish acquired in the hobby may have been aquarium bred for many generations and already become accustomed to water conditions quite different to their natural habitat. Providing a stable pH is usually more important than the exact value, as long as extremes are avoided.
There are of course some fish which do require specific conditions to thrive. You may also want to alter water chemistry to improve success with breeding, or to improve the growth of demanding plants. Increasing pH is usually easier than lowering it, and will usually involve raising hardness at the same time, in order to keep the pH stable. It can be achieved in the following ways:
1. The use of decor containing buffering salts, such as limestone rock.
2. The use of crushed coral in the filter.
3. Commercial buffers and "pH-up" products.
Lowering pH can be more difficult, particularly in hard water which has a good buffering capacity. The following methods are sometimes employed.
1. Filtration through peat, this will be more effective in water with a lower
KH.
2. Commercial "pH-down" products. Again, these will not work effectively where there is a strong buffering capacity. Some will also introduce phosphate to the aquarium which will encourage undesirable algae growth.
Attempting to lower the pH of well-buffered water with commercial chemicals or acid solutions is likely to result in a losing battle, as the buffer system causes the pH to restabilise at its original value. The resultant pH swings are likely to be harmful to fish. The solution is reduce the buffering capacity or carbonate hardness (
KH) first.
Apart from the effect of pH itself, there are important effects on the toxicity of ammonia and nitrite with changing pH. Therefore you should be particularly wary of attempting to change pH when either of these waste products is detectable - in particular, during the cycle. It is safer to let the cycle finish before attempting to adjust pH - it may settle at a different value once the cycle is complete in any case.