The friendliest place on the web for anyone with an interest in aquariums or fish keeping!
If you have answers, please help by responding to the unanswered posts.
Oh i do!!! I plan on having it ready to go by next weekend ! Im going to be buying a few single t5 ho fixtures by sunblazer. Its 33 bucks for a 48 inch fixture and it comes with a 6500 k bulb id switch out to actinic or 14 k
I'm not sure it was eating great and swam fine it did lose its color a little and was starting to look bad! And will you post a pic of your tang please!
There should be a flat round piece of black rubber that sits between the dry side and the glass. That should keep it from sliding around. Is that installed?
My 92 is 3/8 glass. Did you calibrate the dry side by pulling off the cover and lining up the glass thickness with power cord? Be careful not to bend pins.
Just some alignment pins. You will see them when you pull the cover off. Just make sure you don't force it and the slide straight in. No big deal if your careful. It only takes about ten seconds to calibrate it. If your glass is 3/8, look at the dry side (off the tank). The part that goes against the tank has a scale on it. The 3/8 (or what ever your glass thickness) should be in line with the power cord.