-=Jeff=-
Aquarium Advice Freak
Here is the progress of my tank stand for my 50g
the tank sis 30x18x21. the stand is 31x19x30ish ( might be close the 31) but the height is the same on all corners
Main frame assembled:
I used 2x2 to secure the 2x4 uprights and top & bottom frames together. I also used Liquid nails on all the joints
Here are my helpers:
Top and bottom shelves:
Finally the sides and face panels cut to size:
I Liquid Nailed the side on, they should be solid tonight. I still need to cut a hole in the face for the doors then mount it
the tank sis 30x18x21. the stand is 31x19x30ish ( might be close the 31) but the height is the same on all corners
Main frame assembled:
I used 2x2 to secure the 2x4 uprights and top & bottom frames together. I also used Liquid nails on all the joints
Here are my helpers:
Top and bottom shelves:
Finally the sides and face panels cut to size:
I Liquid Nailed the side on, they should be solid tonight. I still need to cut a hole in the face for the doors then mount it