Pisces3473
Aquarium Advice FINatic
Fellow Salters, I am currently in the very early stages (first 24 hours) of establishing a 10 gallon SW tank. I have some exp with FW however none with SW. I've done some reading and talked with the owners of the LFS. I'm both excited and nervous about this new adventure. Any and all of your advice is welcome and appreciated. Please ask me questions about why I've got what I do cause, but be warned the answer may be 'I don't know' and I'm smart enough to know that. Here we go!
What I've got:
Tank: Standard 10 gallon
Filter: Top Fin Power Filter 75 (Not sure how much it's moving but the 60 does 300 GPH) its got adjustable flow and I've got it set to 50% or the middle. I've looked but cannot locate the specs anywhere. Also, I've got the carbon packs pulled out and am running Phosphate reducer pads along with the black filtration pads. I followed the set-up of the guy at the fish store. He had a 12 gallon Nano w/ 2 Clowns and a HUGE Anemone.
Heater: Top Fin 200 Watt for now, but switching to Fluval E-50.
Thermometer: Digital, with probe set at middle of tank opposite the heater.
Substrate: I used 10 lbs of CaribSea, Fiji Pink for substrate and got 4.7 lbs of Live Rock.
Hood: I've ordered an LED aquarium hood. It's a shallow tank so hopefully this will supply enough light. For now however the tanks getting incandescent light from the old hood.
I've got a test kit for the FW tank and the Reef kit is on the way. I am clueless of where to go from here so all your input is appreciated.

Here'a a pic:
What I've got:
Tank: Standard 10 gallon
Filter: Top Fin Power Filter 75 (Not sure how much it's moving but the 60 does 300 GPH) its got adjustable flow and I've got it set to 50% or the middle. I've looked but cannot locate the specs anywhere. Also, I've got the carbon packs pulled out and am running Phosphate reducer pads along with the black filtration pads. I followed the set-up of the guy at the fish store. He had a 12 gallon Nano w/ 2 Clowns and a HUGE Anemone.
Heater: Top Fin 200 Watt for now, but switching to Fluval E-50.
Thermometer: Digital, with probe set at middle of tank opposite the heater.
Substrate: I used 10 lbs of CaribSea, Fiji Pink for substrate and got 4.7 lbs of Live Rock.
Hood: I've ordered an LED aquarium hood. It's a shallow tank so hopefully this will supply enough light. For now however the tanks getting incandescent light from the old hood.
I've got a test kit for the FW tank and the Reef kit is on the way. I am clueless of where to go from here so all your input is appreciated.

Here'a a pic: