Bichir Bro
Aquarium Advice Addict
- Joined
- Aug 7, 2013
- Messages
- 1,773
Mehhh.. it's fallapartical board doing its thing...
Sent from my SAMSUNG-SM-G900A using Aquarium Advice mobile app
fallapartical board
Hahah.. aweful things that we do not talk about it's just the laminate lifting from prolonged exposure to moisture. Funny thing is the material they make Aquarium stands out if is probably the least resilient to moisture.. go figure..
Plus side is the core of your stand is intact and ready for work.. may be in its/your best interest to push for early retirement though. Or... get a piece of 3/4" plywood between the tank and stand..
Sent from my SAMSUNG-SM-G900A using Aquarium Advice mobile app
I laughed so hard at this; it's so true. As ugly as they are, this is why I use metal stands. I agree with Brookster, I would put some plywood in there.
^+1^ with sin and brook!I laughed so hard at this; it's so true. As ugly as they are, this is why I use metal stands. I agree with Brookster, I would put some plywood in there.
^+1^ with sin and brook!
Plywood or a new stand.
Take a long look at the support(sides) of the stand as they are made of same ****!
A 2x4 or two in each corner of stand can long way if it is needed and possible.
My arms are fully stretched as I say.. "Frankenstein stand..muhahhaha"
app
New stand would be my vote but plywood will suffice.
Sent from my SAMSUNG-SM-G900A using Aquarium Advice mobile app
^+1^ with sin and brook!
Plywood or a new stand.
Take a long look at the support(sides) of the stand as they are made of same ****!
A 2x4 or two in each corner of stand can long way if it is needed and possible.
My arms are fully stretched as I say.. "Frankenstein stand..muhahhaha"
Sent from my SAMSUNG-SM-G900A using Aquarium Advice mobile app
I have to agree. I'd go the plywood route only if the sides are still intact and there are no soft spots in them. Any damage and I'd be going with a new stand. No sense waking up to a loud crash or a fast leak one day. ( been there, done that. )
As for stand types, if you can get solid wood, that's great. Angel iron stands are also long lived stands ( Better, in my opinion). I currently have one in use that was my Grandmother's so it's over 50 years old. The only thing I've done to it was repaint with rustolium after it held saltwater tanks for a few years. Just make sure you get one designed for Aquariums and not a plant stand ( which are not made to hold the weight. )
Hope this helps
Hello again, I've got one last question if you guys are still around. How long do you think I have until somethin really really needs to get done. I'm likely going to be selling the entire set up in 3-4 months, think she can make it?
That really can't be answered. How bad is the structural integrity? If it's good, it could last. If it's bad, it could go tomorrow. You just don't know with these things. Better off, in my eyes, doing some kind of fix than losing the whole deal because of a cracked or broken tank that fell through the stand.
I think the important question here is where did the moisture come from? do you spill on a regular basis or is the tank seeping on the bottom? If its just from spillage then just replace the stand as everyone else said.