Rejordan73
Aquarium Advice Apprentice
- Joined
- Feb 16, 2012
- Messages
- 10
Hello all,
I'm in the process of redoing my pluming for my 150 gallon saltwater tank and I was looking for some advise. Right now my system has two internal overflows that go into a 30 gallon glass aquarium / mod sump. I have a external Coralife 1100 P pump that connects to a 1 inch PVC that then connects to 2 3/4 PVC tubes that send water inside the tank. When the water flows back into the tank it does so through 1 inch flex tube. I can show pics if any one wants to see.
I now want to add a 36 watt UV sterilizer,check valves and possibly a chiller. I want to do it right but I'm not to familiar about flow rates connecting them together.
Should I connect the pump to 1 inch or 3/4 PVC? And keep the return line at 1 inch PVC? When I connect the UV, is it better to have a 3/4 or 1 in PVC? And should put a control valve at the start. Of the UV sterilizer? And then I was thinking of running the return line of the UV back to the sump, what do you think?
The return lines are going to be 1 inch, but the check valves I have are 3/4, will that be OK?
And last, how can I reduce the salt spray coming from the sump?
Thanks in advance
I'm in the process of redoing my pluming for my 150 gallon saltwater tank and I was looking for some advise. Right now my system has two internal overflows that go into a 30 gallon glass aquarium / mod sump. I have a external Coralife 1100 P pump that connects to a 1 inch PVC that then connects to 2 3/4 PVC tubes that send water inside the tank. When the water flows back into the tank it does so through 1 inch flex tube. I can show pics if any one wants to see.
I now want to add a 36 watt UV sterilizer,check valves and possibly a chiller. I want to do it right but I'm not to familiar about flow rates connecting them together.
Should I connect the pump to 1 inch or 3/4 PVC? And keep the return line at 1 inch PVC? When I connect the UV, is it better to have a 3/4 or 1 in PVC? And should put a control valve at the start. Of the UV sterilizer? And then I was thinking of running the return line of the UV back to the sump, what do you think?
The return lines are going to be 1 inch, but the check valves I have are 3/4, will that be OK?
And last, how can I reduce the salt spray coming from the sump?
Thanks in advance