jjamontan
Aquarium Advice FINatic
It should stick out of the water about 1/4 inch. Can't you replace the short piece?
CloudStrife said:Ok cool thanks!
What about that extra tubing they give you? That long clear one? Whats that for?
Reefnoob84 said:The long piece goes from pump to elbow in a in-sump configuration. Short piece goes from valve attached to pump to elbow
Reefnoob84 said:The long piece goes from pump to elbow in a in-sump configuration. Short piece goes from valve attached to pump to elbow
CloudStrife said:So since its on the tank I don't need it?
CloudStrife said:Just the top half, no bubbles. I can't get the cup off to empty anything. I think I tightened the ring way too hard.
Did you use PVC pipe instead of the one they gave you? Thats probably what I will have to do.
And do you think I can use that stuff they sell at hardware stores to loose very tight jars?
Reefnoob84 said:The outlet piece was for splash didn't make any difference but for your pics yours is def to short it should be an inch above your white pad in the diffuser.
Is the mixing chamber all bubbles or just the top half?